4" Deep Set Pump Ends
4" Deep Set Pump Ends
For extremely deep well applications where the total head is 1,500' (457 m) or less.
Features and Benefits
- 1¼” NPT cast iron discharge and NEMA faced mounting ring
- Integral removable check valve with elastomer sealing ring
- Stainless steel pump shell, cable guard and suction screen
- Steel intermediate connector
- Thermoplastic impellers and diffusers
- Stainless steel hex drive shaft and coupling
- High thrust motors required on all deep set submersible pump ends. Order motors and controls separately.
Product Specifications
| Motor | 2, 3, 5 and 7.5 HP | |
| Hertz | 60 Hz | |
| RPM | 3450 RPM | |
| Phase | 1 or 3 Ph | |
| Stages | 42, 46, 52 and 60 stages | |
| Flow | 5, 7, 10, 19 and 27 GPM | |
| Impeller Type | Thermoplastic impellers | |
Technical Data
Department of Energy Compliance Data
| Model | PEI | Impeller Diameter |
| 4F35A10 | .89 | 3.072 |
| 4F35S10 | .89 | 3.072 |
| 4F35A15 | .89 | 3.072 |
| 4F35S15 | .89 | 3.072 |
| 4F35A20 | .89 | 3.072 |
| 4F35S20 | .89 | 3.072 |
| 4F35A30 | .89 | 3.072 |
| 4F35S30 | .89 | 3.072 |
| 4F35A50 | .89 | 3.072 |
| 4F35S50 | .89 | 3.072 |
| 4F35A75 | .89 | 3.072 |
| 4F35S75 | .89 | 3.072 |
| 4F55A10 | .93 | 3.075 |
| 4F55S10 | .93 | 3.075 |
| 4F55A15 | .93 | 3.075 |
| 4F55S15 | .93 | 3.075 |
| 4F55A20 | .93 | 3.075 |
| 4F35S20 | .93 | 3.075 |
| 4F55A30 | .93 | 3.075 |
| 4F55S30 | .93 | 3.075 |
| 4F55A50 | .93 | 3.075 |
| 4F55S50 | .93 | 3.075 |
| 4F55A75 | .93 | 3.075 |
| 4F35S75 | .93 | 3.075 |
| 4F85A10 | .99 | 3.070 |
| 4F85S10 | .99 | 3.070 |
| 4F85A15 | .99 | 3.070 |
| 4F85S15 | .99 | 3.070 |
| 4F85A20 | .99 | 3.070 |
| 4F85S20 | .99 | 3.070 |
| 4F85A30 | .99 | 3.070 |
| 4F85S30 | .99 | 3.070 |
| 4F85A50 | .99 | 3.070 |
| 4F85S50 | .99 | 3.070 |
| 4F85A75 | .99 | 3.070 |
| 4F85S75 | .99 | 3.070 |
Model Comparison Charts
- Specification Chart Deepset Submersible Pumps
- Material Construction Chart 4 In Deepset Submersible Pumps