Asia Pacific / English Change

Fountain Pond Pump

Possible Cause

Corrective Action

UNIT WON’T RUN

Circuit breaker tripped

Reset circuit breaker.

Low Voltage

Verify voltage.

GFI Tripped

Reset GFI.

Excessive Cable Length

Verify acceptable maximum cable length.

Timer/clock not set

Set clock to local time and timers for desired cycle. See Section on Setting Timers.

NO OR LOW SPRAY

Blocked screen or nozzle, missing or damaged o-ring, or incorrectly installed nozzle

Disconnect power. Clean screen and/or nozzle. Check that o-ring is undamaged and seated in groove. Check that nozzle is installed properly (nozzles are marked “This side up”). Check depth of pond. If less than 5 feet deep, move to deeper section. Restart unit.

GFI TRIPS

Electrical storm can trip GFI

Reset GFI.

Short in system

Disconnect power and check cord for damage. If cord is damaged contact customer service help line at 1-800-742-5044.

Defective power cable

Disconnect power and check cord for damage. If cord is damaged contact customer service help line at 1-800-742-5044.

UNIT SPINS

Anchor rope(s) loose

Check anchor rope(s) and re-attach if necessary.

×
×